Stable Doors

At Redmire Stables we have four ranges of stables, and can supply just standard stable doors only from these ranges or on a bespoke basis to suit your requirements. 

(measurements stated may vary slightly)

.

                                       Albury Range Stable Door

 Albury stable door  Reverse of Albury stable door

  • 2130x1220x53(mm) - (top door is unlined so approx 43mm thick)
  • Ledged and braced with 100x28mm treated softwood timber
  • Clad externally with treated 16mm softwood TGV
  • Lined internally on bottom door only in 9mm ply  
  • Ironmongery is BZP (Bright Zinc Plated) unless stated
  • Pre-formed galvanised chewstrip to top of bottom door
  • 200mm animal Bolt to bottom door
  • Galvanised kickover latch to bottom door
  • Brenton Pad Bolt to top door
  • 150mm Cabin Hook to top door only
  • T-Hinges (BZP)
  • Bottom door is 1220mm high

                                         Haven Range Stable Door

 Haven stable door  Reverse of Haven stable door

  • 2130x1220x56(mm)
  • Ledged and braced with 150x28mm pressure treated softwood timber 
  • Clad externally with pressure treated 16mm softwood TGV
  • Lined internally with 12mm ply
  • Ironmongery is galvanised
  • Pre-formed galvanised chewstrip to top of bottom doors
  • 200mm animal Bolt
  • Galvanised kickover latch to bottom door
  • Brenton Pad Bolt to top door
  • 150mm Cabin Hook to both doors
  • T-Hinges (galvanised)
  • Bottom door is 1220mm high

                                      Hunter Range Stable Door

Hunter Stable Door   

  • 2130x1220x56(mm)
  • Ledged and braced with 150x28mm pressure treated softwood timber
  • Clad externally with pressure treated 16mm softwood TGV
  • Lined internally with 12mm ply to both doors 
  • Ironmongery is galvanised
  • Pre-formed galvanised chewstrip to top of bottom door
  • 200mm animal Bolt
  • Kickover Latch to bottom door
  • Brenton Pad Bolt to top door
  • 150mm Cabin Hooks to top and bottom doors
  • Heavy Tee hinges
  • Bottom door is 1220mm high                                       

                                       Pony Door (all ranges)

Pony Door   

  • Available in all ranges
  • Standard height of bottom door is 41 inches (1042mm)
  • Bottom door can be made to any height required