Goodwood Range - Specification

All sizes quoted are actual and not nominal

Cladding
175 x 22 x 10mm sawn weatherboard cladding or optional 150 x 19mm overlap shiplap available fixed with 50mm triple life sheridized ring-shanked nails.

Framework
Constructed of 100 x 47mm eased edge (planed) timber with vertical studwork at 600mm centres. Wind bracing fitted on all unlined structures. Further cross bracing at 1.22m behind kick boarding if applicable.
All walls bolted together with various sized bolts and screws.

Fixing To Base
Bolted to base via 200mm concrete anchor fixing or 300 x 50 x 4mm galvanised strap at 600mm or 1.2m centres respectively. Galvanised brackets used at all door apertures. Single course of 130mm wide brickwork required on all front, middle and end walls, single course of 100mm wide brickwork on remaining walls.

Door Frames & Openings
100 x 94mm (double studwork) at either side of all door openings in conjunction with 100 x 75mm timber frame for which doors are hung from. Aperture opening heights are 2.24m on single course of brickwork.

Internal Lining
Stables are kick-boarded to eaves height (2.4m) as standard with 18mm plywood. 12mm plywood fitted to tack rooms. Feed stores and Hay barns remain unlined.

Windows
Joinery grade timber framed window, glazed with 4mm toughened glass. Inward opening latched top part with heavy duty shaped galvanised window grill. Alternative 6 blade louvered windows available, sizes dependant on building and door location.

Doors (Stables)
1200mm x 2250mm x 60mm
• All ironmongery is hot dipped galvanised
• All chew strips manufactured with 15mm dia corners
• 600mm heavy reversible cup hinges
• Chew-strip to bottom door extending down front face by 600mm
• Lined internally with 12mm hardwood plywood stained brown
• 200mm brenton bolt to bottom door
• Kick-over latch
• 100mm brenton bolt to top door
• 150mm cabin hooks to both parts
• Bottom door height – 1270mm
• Full height doorframe protection fitted Inc galvanised chew-strip to inside edge of top door

Doors (Tack Room / Feed Room)
850mm x 200mm x 50mm
• 3 x 75mm hidden brass butt hinges
• Five lever mortice lock inc two keys
• Full ledged & braced softwood timber construction
• Fitted into softwood frame inc all necessary weather strips
• 100 x 75mm secondary frame surround
• Stained light brown unless other wise stated or requested

Doors (Hay Barn / Garage)
Various sizes available (2250mm high x 75mm thickness)
Standard sizes range from 1800mm to 3000mm wide
• All ironmongery hot dipped galvanised
• 600mm heavy reversible cup hinges
• Various locks available
• 100 x 75mm softwood timber door frame
• Door constructed of 150 x 75mm joinery grade timber
• 150 x 22mm tongued & groove timber cladding in various designs

Overhang / Canopy
All cantilever canopies are underlined with 125 x 47mm framework with a 12mm softwood overlap patterned finish cladding. Overhang supported by 125 x 125mm oak posts onto 150 x 75mm front lintel inc curved bracing. Posts bolted to concrete base work via galvanised footplates. Standard 1.8m overhang with 1.4m available on 4.0m depth buildings.

Roofing Structure
Standard 3.6m depth building with a 1.8m overhang, ridge height is 3.9m not including single course of brickwork. A 4.0m depth building is supplied with a 1.4m overhang with identical eaves & ridge measurements. 150 x 47mm sawn purlins held in place with galvanised joist hangers at 600mm centres. A pair 450 x 450mm gable end vents to all gable ends. Ridge vents supplied upon request. Corner units are of a double valley design with lead lined valleys. Trusses constructed of 100 x 47mm and 125 x 47mm eased edge / planed timber. All trusses fixed to partitions by way of 100mm or 150mm timber-lock screws.

Roofing Finishes
Five star cedar shingles with matching ridge fitted with stainless steel nails as standard onto treated 25 x 38mm tile battens over 18mm oriented strand board (OSB). Alternative roof finishes available, see options.

Guttering
112mm black deep flow Upvc gutters fitted with 68mm down pipes to front and rear elevations.

Tack Rooms / Feed Rooms
Fully lined to eaves height (2.4m) with 12mm plywood. All exterior partitions lined with building paper. Insulated with 150mm fibreglass insulation. Roof insulated between roof timbers with 100mm celotex board or similar and lined underneath with 12mm profiled timber. Adjacent trusses are similarly lined and insulated. No windows supplied.

Hay Barns
Similar in design to stables but are unlined on the interior, to show the framework. Fitted with barn doors as standard. All other specifications apply as per stables.

Corner Boxes
Double valley design with gable end fitted to one side of the corner box. A pair of gable end vents with end truss. Stable door to front elevation with one window to rear wall. All other specifications apply as to stables.

Treatment – Exterior Finish
All timbers with exception of any sheet material are vacuum pressure impregnated treated with permawood 1704 preservative manufactured to BS8417 table 9. Standard colour finish is indicated within the relevant brochure. Alternative colour finishes are dark brown or black. Some building may require further treatments during construction on site.

Installations
The Goodwood Range is very labour intensive on site and therefore has a long construction schedule. A two-week break is recommended before subsequent contractors are allowed to fit other services. All installation schedules are estimated. Due to the extensive amount of carpentry work involved on site, overnight accommodation cost’s etc. It is against Redmire’s pricing policy to undertake contracts in certain areas of the country. Please check delivery region map for relevant installation areas.

OPTIONAL EXTRAS

150 x 19mm shiplap cladding
Increase eaves height to 3m
Increase ridge height
Construct roof structure to support clay tiled finish (tiling by others)
Box profile polyester coated steel roofing
Additional doors
Additional windows
Top back doors and windows
Metal gates
Wooden gates
Clock towers
Clocks
Weathervanes
1.2m and 1.8m talkgrilles Inc aperture chewing protection
Casement windows including glazing
Full lining to eaves for hay barns, garages and workshops
Felt tile roof finish (minimum roof pitches apply)
PPC steel box profile roofing in various colours
Sliding doors
Insulated walls (tack / feed rooms are fully insulated as standard)
Cast iron effect guttering
Staining buildings, dark brown or black
Painting of doors white or green (other colours available)